NTC/PTCSIMULATION NTCS-8100

MORE SAFETY AND CONTROL FOR YOUR DEVELOPMENT.

Efficiency, reliability and safety of modern lithium ion batteries for electric vehicle drives strongly depend on the Battery Management System (BMS) as their electronic control unit. As an overheated battery is a high safety risk, monitoring and controlling of the temperature has become very important. For development, validation and test of the control algorithms of the BMS, a high-precision temperature simulation in the voltage area of the battery is required. This is achieved by the comemso NTCS-8100 board.

All features of the NTCS-8100 NTC/PTC simulator.

Programming and fault simulation for more efficient development.
The NTC/PTC simulation board is a device to simulate characteristic curves of NTC/PTC resistors at a value range of 0 Ohm .. 8.1 MOhm at a resolution of 1 Ohm. The NTCS-8100 board consists of two separately adjustable resistor channels, each consisting of a resistor cascade. The resistance value as well as the temperature value can be provided for resistor adjustment by comemso. If required, the NTC  / PTC characteristic curve can be aligned and programmed into the NTC-S. Additionally, the NTC-S board offers extensive fault simulation per channel. With the fault injection it is possible to simulate short circuit or cable break at the simulated temperature sensor and also to feed in different external voltages, e.g. CL30, CL31.
 

Multiple application areas.
This device has been specially developed to simulate temperature sensors in the area of electric vehicle batteries and is therefore developed for the voltage range of up to 1 kV. Beyond that the NTCS-8100 board can also be used in other technical areas, e.g. for the temperature simulation at building automation of modern heating systems.